Hydrogen-bonded assembly and binding affinity of the multi-point acceptor and isophthalic acid

Supermolecular complexes formed by oligophenyleneethynylene derivatives and isophthalic acid were studied using AM1 method to obtain binding energy. Electronic spectra and IR spectra of the complexes were calculated by INDO/CIS and AM1 methods based on AM1 geometries. Results indicated that the dimer could be formed by the monomers via hydrogen bonding because of the negative binding energy. Binding energy of the complexes was affected by electronegativity and steric effects of the substituents. The first UV absorptions and IR frequencies of N-H bonds of the complexes were both red-shifted compared with those of the monomers. The complexes could bind small molecules via hydrogen bonds, resulting in the change in UV absorptions and an increase in IR frequencies of N-H bonds.     

铜、钴、镍同时分离工艺的研究

稀土体系三种元素同时分离的工艺最近已有发表,但非稀土方面的工作尚未见报导.对Cu、Co、Ni三种元素,通常是将Cu、Co作为一个组份与Ni分离.本工作对组成为Cu:Co:Ni=1:1:1的水相合成料液设计了两种工艺,进行了串级实验,实现了该三种元素的同时分离, 串级实验以HEH(EHP)作萃取剂,煤油为稀释剂,其它试剂均用分析纯.     

可逆与不可逆吸附氢在合成甲醇反应中的作用

在自行设计和建立的加压动态分析装置上研究了合成甲醇催化剂上氢的吸附和反应行为。结果表明:在反应条件下催化剂上吸附的氢可分为可逆吸附氢和不可逆吸附氢;不可逆吸附氢又可分为能被CO顶替出来的和不能被CO顶替出来的两部分;能被CO顶替出来的不可逆吸附氢对CO的吸附起促进作用,不能被CO顶替出来的不可逆吸附氢是合成甲醇催化剂必不可少的“组分”或称“促进剂”;同时甲醇的生成是可逆吸附氢与一氧化碳作用的结果。     

冠醚B15C5萃取分离锂同位素的阴离子效应

本文研究了B15C5冠醚萃取锂盐时,不同阴离子对体系的同位素分离效应的影响。结果表明,阴离子在冠醚萃取过程中不仅对萃取络合物的稳定性有显著影响,而且阴离子半径及软度越大时,萃取体系的锂同位素分离系数(α_(LI))也越大。     

Synthesis,characterization, and theoretical studies of group 4 amido hydrotris(pyrazolyl)borate complexes

Titanium and zirconium amido complexes containing a hydrotris(pyrazolyl)borate (Tp) or hydrotris(3,5-dimethylpyrazolyl)borate (Tp*) ligand TpM(NMe(2))(3) (M = Ti, 1; M = Zr, 2) and Tp*M(NMe(2))(3) (M = Ti, 3; M = Zr, 4) were prepared by the reactions of M(NMe(2))(3)Cl (M = Ti, Zr) with sodium hydridotris(pyrazol-1-yl)borate and potassium hydridotris(3,5-dimethylpyrazol-1-yl)borate, respectively. The structures of 1, 2, and 4.CH(2)Cl(2) were determined by X-ray diffraction and show octahedral coordination geometry around the metal centers. Density functional theory calculations at the B3PW91 level were performed to understand the orientations and the rotational behavior of amido ligands in these metal complexes.     

Electronic structures and nonlinear optical properties of trinuclear transition metal clusters M-(mu-S)-M' (M = Mo,W; M' = Cu,Ag, Au)

A series of trinuclear metal clusters MS4(M'PPh3)2(M'PPh3) (M = Mo, W; M' = Cu, Ag, Au) have been studied using the density functional theory (DFT) method. The static polarizabilities and hyperpolarizabilities of the model clusters have been calculated using the finite-field (F-F) method. The model clusters, divided into two groups, are alike in the structure of two fragments of rhombic units M-(mu-S)2-M' (M = Mo, W; M' = Cu, Ag, Au), perpendicular to each other, which are joined by sharing the bridge metal M. It is the charge transfer from one of these moieties to the other in these characteristic sulfido-transitional metal cores that is responsible for the polarizabilities and hyperpolarizabilities. This kind of electronic delocalization, different from that of the planar pi-system, is interesting and warrants further investigation. The structural effects on properties are important. In these models, considerable third-order nonlinearities are exhibited. The element substitution effect of Mo and W is weak, while that of Cu and Ag is relatively substantial. An overall order is gamma xxxx(Mo-Ag) > gamma xxxx(W-Ag) > gamma xxxx(Mo-Au) > gamma xxxx(W-Au) > gamma xxxx (Mo-Cu) > gamma xxxx(W-Cu) and gamma av(Mo-Ag) approximately gamma av(W-Ag) > gamma av(Mo-Au) approximately gamma av(W-Au) approximately gamma av (Mo-Cu) approximately gamma av(W-Cu).     

An electrochemical investigation on (MoO<Subscript>3</Subscript>+PVP+PVA) nanobelts for lithium batteries

Molybdenum trioxide (MoO₃) xerogel films modified with poly(vinyl alcohol)+poly(vinyl pyrrolidone) (PVP+PVA) polyblends were obtained by ion-exchange method with sol-gel technique. Investigations were conducted using X-ray “diffractometry”, Fourier transform infrared spectroscopy, and cyclic voltammetry. The results show that the H atoms in polyblend are H-bonded with the O atoms in the Mo=O bonds of MoO₃ xerogel, which effectively shield the electrostatic interaction between MoO₃ interlayer and Li⁺ ions when MoO₃ xerogel is modified by the intercalation of (PVP+PVA). The reversibility of the insertion/extraction of Li⁺ ions is greatly improved by the modification with polyblend of MoO₃ nanocomposite films. MoO₃ and (PVP+PVA) _x MoO₃ (x = 0, 0.5) nanobelts were obtained by a simple hydrothermal process from MoO₃ sol. The electrochemical cells with configuration Li/(LiPF₆+EC+DMC)/MoO₃ modified by (PVP+PVA) were fabricated and their discharge profiles studied.     

钍试剂Ⅱ及铍(Ⅱ)-钍试剂Ⅱ电化学行为的研究——Ⅰ.铍(Ⅱ)-钍试剂Ⅱ配合物吸附电流的研究和应用

本文研究了铍(Ⅱ)-钍试剂Ⅱ在EDTA、二苯胍、氨-铵缓冲溶液(pH9.5)中的电极行为和电流性质,并对有关机理进行了探讨。提出痕量铍的测定方法,线性范围为0.0005～0.1μg/ml。检出限为0.2ngBe(Ⅱ)/ Ml。用于煤飞灰中铍的直接测定,操作简单,结果满意。     

CeO2-ZrO2-Y2O3对Pt-Rh型三效催化剂性能的影响

采用共沉淀法技术制备了Ce0.35Zr0.55Y0.10固溶体,并对其进行了比表面积、储氧量的测试和XRD的表征.将其用于低贵金属Pt-Rh型三效催化剂的制备,考察了CeO2-ZrO2-Y2O3对三效催化剂性能的影响.结果表明,Ce0.35Zr0.55Y0.10具有与Ce0.50Zr0.50O2相似的立方结构和相近的储氧量,经高温(1000 ℃)后仍能保持较大的比表面积(38.66 m2·g-1).和含Ce0.50Zr0.50O2的三效催化剂相比,含CeO2-ZrO2-Y2O3的三效催化剂经高温老化后,C3H8,CO,NO仍具有较高的转化率和较低的起燃温度.     

室温下镀钯多壁碳纳米管对苯的气敏响应特性

在酸氧化后的多壁碳纳米管上化学还原镀钯,用水将镀钯后的碳管清洗至中性并配制成悬浊液,将悬浊液旋涂在真空溅射的叉指金电极表面,干燥后作为气敏膜,把气敏膜暴露于一定浓度的苯气体中,检测传感器的电流变化,并计算其灵敏度。镀钯后的多壁碳管在室温下对苯响应和回复迅速,电导变化与苯气体的浓度呈良好的线性关系,其线性回归方程y=0.0041x 0.1288,r=0.9546。Pd颗粒对苯分子和碳管壁结构缺陷间的电子转移的促进作用可能是多壁碳管镀钯后产生良好气敏响应的原因。